ZutaCore-Icon-Dec22

ZutaCore and Munters Join Forces to Deliver a Waterless Data Center Architecture for AI Factories

The Solution Brings an Unprecedented Reduction in OPEX, Power Consumption and Energy Usage to the Data Center

September 17, 2024, San Jose, CA

ZutaCore®, a leading provider of direct-to-chip, waterless liquid cooling solutions, and Munters, a global leader in energy-efficient air treatment and climate solutions, today announced the integration of their two platforms to provide a two-phase, waterless liquid cooling solution to sustainably cool AI factories faced with massive power densities driven by AI accelerators. The solution is designed to liquid cool 100s of Megawatts of AI Workloads; the combined system works seamlessly inside an AI factory, with Munter’s SyCool (N+1) rejecting the heat outside the data center (facility loop) and ZutaCore Hypercool®, removing the heat away from the AI accelerators (technical loop) in highly efficient closed-loop systems that are easy to operate and offer the most optimized PUE and WUE factors for a sustainable, cost-efficient, high-performing AI data center.

Munters award winning air and liquid cooling system SyCool Split combined with ZutaCore’s waterless liquid cooling solution revolutionizes data centers by removing heat from the processor and eliminates IT risks. Together Munters and ZutaCore enhances compute density, cuts power usage, and supports heat recovery, making it the most OPEX-efficient solution for the data center.

“With AI factories being 5-10 times more dense than traditional data centers, there is no other way to cool AI silicon and remove this amount of heat without liquid cooling,” said Erez Freibach, Co-founder and CEO at ZutaCore. “Furthermore, GPUs are pushing thermal boundaries with known hot spots. AI workloads demand GPU density and stable thermal environments to maximize AI performance. This is also where two-phase, direct-to-chip liquid cooling separates itself from any other solution in the market because it uses no water, takes up little real estate, requires much less power, and allows a heat recovery pathway. These are the key reasons HyperCool is already being selected in key AI factories around the globe. With this partnership with Munters, we are well positioned to grow this leadership even further.”

“Combining the advanced closed-loop systems of Munters and ZutaCore delivers an unmatched end-to-end solution, which is uniquely positioned to meet the demands of high-density, high-value environments,” said Stefan Aspman, President of Business Area Data Center Technologies at Munters.

“ZutaCore and Munters are pioneering a blueprint for sustainable AI data center architecture,” he continued. “It not only addresses intense heat loads with distinct advantages through its waterless 2-phase solution, but also sets a new benchmark for CAPEX and OPEX savings, challenging other cooling technologies available today.”

Combining Two Closed-Loop Systems

As part of their partnership, Munters has integrated the HyperCool closed-loop system at the server and rack level with the Munters closed-loop system that provides the ability to remove heat from the data center without a facility water loop. Munters SyCool uses a refrigerant-based thermosiphon loop, extracting the heat dissipated by HyperCool at each rack, and transporting the heat up risers to modular condensers on the roof where the heat is rejected to ambient.  The heat can alternatively be reused for other applications, such as heating adjacent facilities, etc. 

ZutaCore’s HyperCool has been proven to cool the hottest processors of 2,800 watts at a PUE as low as 1.05 – 1.07 increasing compute density. This delivers 10-20% better energy efficiency with dynamic cooling, smaller pumps, and no performance degradation over time. The heat transfer fluid never has to be replaced and poses none of the risks that water presents in terms of leakage or corrosion. The system allows for higher server densification needed in AI factories, consuming up to 50% less space than air-assisted liquid-cooled datacenter and up to 75% less space than immersion cooling.

About ZutaCore:

 

ZutaCore's waterless direct-to-chip two-phase liquid cooling revolutionizes data centers by removing heat from the processor and eliminates IT risks. It enhances compute density, cuts power usage, and supports heat recovery, making it the most OPEX-efficient solution for HPC and AI workloads. Founded in 2016, ZutaCore is headquartered in San Jose, California, with an R&D center in Israel and offices in Europe, India, and Taiwan. Learn more at www.zutacore.com.

ZutaCore Press Contact:
Alison Deane
Vice President, Marketing
marketing@zutacore.com